Caution

The documentation you are viewing is for an older version of this component.
Switch to the latest (v3) version.

Reference

Usage Examples

Below are several usage examples, covering a variety of ways of creating and managing an application.

In all examples, the assumption is the following directory structure:

.
├── config
├── data
├── composer.json
├── public
│   └── index.php
├── src
└── vendor

We assume also that:

You have installed mezzio per the installation instructions.
public/ will be the document root of your application.
Your own classes are under src/ with the top-level namespace App, and you have configured autoloading in your composer.json for those classes (this should be done for you during installation).

Using the built-in web server

You can use the built-in web server to run the examples. Run:
$ php -S 0.0.0.0:8080 -t public
from the application root to start up a web server running on port 8080, and then browse to http://localhost:8080/. If you used the Mezzio installer, the following is equivalent:
$ composer run --timeout=0 serve
Setting up autoloading for the Application namespace

In your composer.json file, place the following:
"autoload": {
    "psr-4": {
        "Application\\": "src/"
    }
},
Once done, run:
$ composer dump-autoload

Routing

As noted in the Application documentation, routing is abstracted and can be accomplished by calling any of the following methods:

route($path, $middleware, array $methods = null, $name = null) to route to a path and match any HTTP method, multiple HTTP methods, or custom HTTP methods.
get($path, $middleware, $name = null) to route to a path that will only respond to the GET HTTP method.
post($path, $middleware, $name = null) to route to a path that will only respond to the POST HTTP method.
put($path, $middleware, $name = null) to route to a path that will only respond to the PUT HTTP method.
patch($path, $middleware, $name = null) to route to a path that will only respond to the PATCH HTTP method.
delete($path, $middleware, $name = null) to route to a path that will only respond to the DELETE HTTP method.

All methods return a Mezzio\Router\Route method, which allows you to specify additional options to associate with the route (e.g., for specifying criteria, default values to match, etc.).

As examples:

// GET
// This demonstrates passing a middleware instance (assuming $helloWorld is
// valid middleware)
$app->get('/', $helloWorld);

// POST
// This example specifies the middleware as a service name instead of as
// actual executable middleware.
$app->post('/trackback', 'TrackBack');

// PUT
// This example shows operating on the returned route. In this case, it's adding
// regex tokens to restrict what values for {id} will match. (The tokens feature
// is specific to Aura.Router.)
$app->put('/post/{id}', 'ReplacePost')
    ->setOptions([
        'tokens' => ['id' => '\d+'],
    ]);

// PATCH
// This example builds on the one above. Mezzio allows you to specify
// the same path for a route matching on a different HTTP method, and
// corresponding to different middleware.
$app->patch('/post/{id}', 'UpdatePost')
    ->setOptions([
        'tokens' => ['id' => '\d+'],
    ]);

// DELETE
$app->delete('/post/{id}', 'DeletePost')
    ->setOptions([
        'tokens' => ['id' => '\d+'],
    ]);

// Matching ALL HTTP methods
// If the underlying router supports matching any HTTP method, the following
// will do so. Note: FastRoute *requires* you to specify the HTTP methods
// allowed explicitly, and does not support wildcard routes. As such, the
// following example maps to the combination of HEAD, OPTIONS, GET, POST, PATCH,
// PUT, TRACE, and DELETE.
// Just like the previous examples, it returns a Route instance that you can
// further manipulate.
$app->route('/post/{id}', 'HandlePost')
    ->setOptions([
        'tokens' => ['id' => '\d+'],
    ]);

// Matching multiple HTTP methods
// You can pass an array of HTTP methods as a third argument to route(); in such
// cases, routing will match if any of the specified HTTP methods are provided.
$app->route('/post', 'HandlePostCollection', ['GET', 'POST']);

// Matching NO HTTP methods
// Pass an empty array to the HTTP methods. HEAD and OPTIONS will still be
// honored. (In FastRoute, GET is also honored.)
$app->route('/post', 'WillThisHandlePost', []);

Finally, if desired, you can create a Mezzio\Router\Route instance manually and pass it to route() as the sole argument:

$route = new Route('/post', 'HandlePost', ['GET', 'POST']);
$route->setOptions($options);

$app->route($route);

Hello World using a Container

Mezzio works with PSR-11 Containers, though it's an optional feature. By default, if you use the AppFactory, it will use laminas-servicemanager so long as that package is installed.

In the following example, we'll populate the container with our middleware, and the application will pull it from there when matched.

Edit your public/index.php to read as follows:

use Interop\Http\ServerMiddleware\DelegateInterface;
use Laminas\Diactoros\Response\JsonResponse;
use Laminas\Diactoros\Response\TextResponse;
use Mezzio\AppFactory;
use Laminas\ServiceManager\ServiceManager;

require __DIR__ . '/../vendor/autoload.php';

$container = new ServiceManager();

$container->setFactory('HelloWorld', function ($container) {
    return function ($request, DelegateInterface $delegate) {
        return new TextResponse('Hello, world!');
    };
});

$container->setFactory('Ping', function ($container) {
    return function ($request, DelegateInterface $delegate) {
        return new JsonResponse(['ack' => time()]);
    };
});

$app = AppFactory::create($container);
$app->get('/', 'HelloWorld');
$app->get('/ping', 'Ping');

$app->pipeRoutingMiddleware();
$app->pipeDispatchMiddleware();

$app->run();

In the example above, we pass our container to AppFactory. We could have also done this instead:

$app = AppFactory::create();
$container = $app->getContainer();

and then added our service definitions. We recommend passing the container to the factory instead; if we ever change which container we use by default, your code might not work!

The following two lines are the ones of interest:

$app->get('/', 'HelloWorld');
$app->get('/ping', 'Ping');

These map the two paths to service names instead of callables. When routing matches a path, it does the following:

If the middleware provided when defining the route is callable, it uses it directly.
If the middleware is a valid service name in the container, it pulls it from the container. This is what happens in this example.
Finally, if no container is available, or the service name is not found in the container, it checks to see if it's a valid class name; if so, it instantiates and returns the class instance.

If you fire up your web server, you'll find that the / and /ping paths continue to work.

One other approach you could take would be to define the application itself in the container, and then pull it from there:

$container->setFactory('Mezzio\Application', function ($container) {
    $app = AppFactory::create($container);
    $app->get('/', 'HelloWorld');
    $app->get('/ping', 'Ping');
    return $app;
});

$app = $container->get('Mezzio\Application');
$app->run();

This is a nice way to encapsulate the application creation. You could then potentially move all service configuration to another file! (We already document an ApplicationFactory for exactly this scenario.)

Hello World using a Configuration-Driven Container

In the above example, we configured our middleware as services, and then passed our service container to the application. At the end, we hinted that you could potentially define the application itself as a service.

Mezzio already provides a service factory for the application instance to provide fine-grained control over your application. In this example, we'll leverage it, defining our routes via configuration.

First, we're going to leverage laminas-config to merge configuration files. This is important, as it allows us to define local, environment-specific configuration in files that we then can exclude from our repository. This practice ensures that things like credentials are not accidentally published in a public repository, and also provides a mechanism for slip-streaming in configuration based on our environment (you might use different settings in development than in production, after all!).

First, install laminas-config and laminas-stdlib:

$ composer require laminas/laminas-config laminas/laminas-stdlib

Now we can start creating our configuration files and container factories.

In config/config.php, place the following:

<?php

use Laminas\Stdlib\ArrayUtils;
use Laminas\Stdlib\Glob;

$config = [];
// Load configuration from autoload path
foreach (Glob::glob('config/autoload/{{,*.}global,{,*.}local}.php', Glob::GLOB_BRACE) as $file) {
    $config = ArrayUtils::merge($config, include $file);
}

// Return an ArrayObject so we can inject the config as a service in Aura.Di
// and still use array checks like ``is_array``.
return new ArrayObject($config, ArrayObject::ARRAY_AS_PROPS);

In config/container.php, place the following:

<?php

use Laminas\ServiceManager\Config;
use Laminas\ServiceManager\ServiceManager;

// Load configuration
$config = require __DIR__.'/config.php';

// Build container
$container = new ServiceManager();
(new Config($config['dependencies']))->configureServiceManager($container);

// Inject config
$container->setService('config', $config);

return $container;

In config/autoload/dependencies.global.php, place the following:

<?php

use Laminas\ServiceManager\Factory\InvokableFactory;

return [
    'dependencies' => [
        'invokables' => [
            \Application\HelloWorldAction::class => InvokableFactory::class,
            \Application\PingAction::class => InvokableFactory::class,
        ],
        'factories' => [
            \Mezzio\Application::class => \Mezzio\Container\ApplicationFactory::class,
        ],
    ],
];

In config/autoload/routes.global.php, place the following:

<?php

return [
    'routes' => [
        [
            'path' => '/',
            'middleware' => \Application\HelloWorldAction::class,
            'allowed_methods' => ['GET'],
        ],
        [
            'path' => '/ping',
            'middleware' => \Application\PingAction::class,
            'allowed_methods' => ['GET'],
        ],
    ],
];

In src/Application/HelloWorld.php, place the following:

<?php

namespace Application;

class HelloWorld
{
    public function __invoke($req, $res, $next)
    {
        $res->getBody()->write('Hello, world!');
        return $res;
    }
}

In src/Application/Ping.php, place the following:

<?php

namespace Application;

use Laminas\Diactoros\Response\JsonResponse;

class Ping
{
    public function __invoke($req, $res, $next)
    {
        return new JsonResponse(['ack' => time()]);
    }
}

After that’s done run:

$ composer dump-autoload

Finally, in public/index.php, place the following:

<?php

// Change to the project root, to simplify resolving paths
chdir(dirname(__DIR__));

// Setup autoloading
require 'vendor/autoload.php';

$container = include 'config/container.php';
$app       = $container->get(Mezzio\Application::class);
$app->run();

Notice that our index file now doesn't have any code related to setting up the application any longer! All it does is set up autoloading, retrieve our service container, pull the application from it, and run it. Our choices for container, router, etc. are all abstracted, and if we change our mind later, this code will continue to work.

Firing up the web server, you'll see the same responses as the previous examples.

Hybrid Container and Programmatic Creation

The above example may look a little daunting at first. By making everything configuration-driven, you sometimes lose a sense for how the code all fits together.

Fortunately, you can mix the two. Building on the example above, we'll add a new route and middleware. Between pulling the application from the container and calling $app->run(), add the following in your public/index.php:

$app->post('/post', function ($request, \Interop\Http\ServerMiddleware\DelegateInterface $delegate) {
    return new \Laminas\Diactoros\Response\TextResponse('IN POST!');
});

Note that we're using post() here; that means you'll have to use cURL, HTTPie, Postman, or some other tool to test making a POST request to the path:

$ curl -X POST http://localhost:8080/post

You should see IN POST! for the response!

Using this approach, you can build re-usable applications that are container-driven, and add one-off routes and middleware as needed.

Using the container to register middleware

If you use a container to fetch your application instance, you have an additional option for specifying middleware for the pipeline: configuration:

<?php

return [
    'routes' => [
        [
            'path' => '/path/to/match',
            'middleware' => 'Middleware Service Name or Callable',
            'allowed_methods' => ['GET', 'POST', 'PATCH'],
            'options' => [
                'stuff' => 'to',
                'pass'  => 'to',
                'the'   => 'underlying router',
            ],
        ],
        // etc.
    ],
    'middleware_pipeline' => [
        // See specification below
    ],
];

The key to note is middleware_pipeline, which is an array of middlewares to register in the pipeline; each will each be pipe()'d to the Application in the order specified.

Each middleware specified must be in the following form:

[
    // required:
    'middleware' => 'Name of middleware service, or a callable',
    // optional:
    'path'  => '/path/to/match',
    'priority' => 1, // Integer
]

Priority should be an integer, and follows the semantics of SplPriorityQueue: higher numbers indicate higher priority (top of the queue; executed earliest), while lower numbers indicated lower priority (bottom of the queue, executed last); negative values are low priority. Items of the same priority are executed in the order in which they are attached.

The default priority is 1, and this priority is used by the routing and dispatch middleware. To indicate that middleware should execute before these, use a priority higher than 1.

The above specification can be used for all middleware, with one exception: registration of the routing and/or dispatch middleware that Mezzio provides. In these cases, use the following constants, which will be caught by the factory and expanded:

Mezzio\Application::ROUTING_MIDDLEWARE for the routing middleware; this should always come before the dispatch middleware.
Mezzio\Application::DISPATCH_MIDDLEWARE for the dispatch middleware.

As an example:

return [
    'middleware_pipeline' => [
        [ /* ... */ ],
        Mezzio\Application::ROUTING_MIDDLEWARE,
        Mezzio\Application::DISPATCH_MIDDLEWARE,
        [ /* ... */ ],
    ],
];

Place routing middleware correctly

If you are defining routes and defining other middleware for the pipeline, you must add the routing middleware. When you do so, make sure you put it at the appropriate location in the pipeline.

Typically, you will place any middleware you want to execute on all requests prior to the routing middleware. This includes utilities for bootstrapping the application (such as injection of the ServerUrlHelper), utilities for injecting common response headers (such as CORS support), etc. Make sure these middleware specifications include the priority key, and that the value of this key is greater than 1.

Use priority to shape the specific workflow you want for your middleware.

Middleware items may be any valid middleware, including arrays of middleware, which indicate a nested middleware pipeline; these may even contain the routing and dispatch middleware constants:

return [
    'middleware_pipeline' => [
        [ /* ... */ ],
        'routing' => [
            'middleware' => [
                Mezzio\Application::ROUTING_MIDDLEWARE,
                /* ... middleware that introspects routing results ... */
                Mezzio\Application::DISPATCH_MIDDLEWARE,
            ],
            'priority' => 1,
        ],
        [ /* ... */ ],
    ],
];

Pipeline keys are ignored

Keys in a middleware_pipeline specification are ignored. However, they can be useful when merging several configurations; if multiple configuration files specify the same key, then those entries will be merged. Be aware, however, that the middleware entry for each, since it is an indexed array, will merge arrays by appending; in other words, order will not be guaranteed within that array after merging. If order is critical, define a middleware spec with priority keys.

The path, if specified, can only be a literal path to match, and is typically used for segregating middleware applications or applying rules to subsets of an application that match a common path root.

Segregating your application to a subpath

One benefit of a middleware-based application is the ability to compose middleware and segregate them by paths. Mezzio\Application is itself middleware, allowing you to do exactly that if desired.

In the following example, we'll assume that $api and $blog are Mezzio\Application instances, and compose them into a Laminas\Stratigility\MiddlewarePipe.

use Laminas\Diactoros\Server;
use Laminas\Diactoros\ServerRequestFactory;
use Laminas\Stratigility\MiddlewarePipe;

require __DIR__ . '/../vendor/autoload.php';

$app = new MiddlewarePipe();
$app->pipe('/blog', $blog);
$app->pipe('/api', $api);

$server = Server::createServerFromRequest(
    $app,
    ServerRequestFactory::fromGlobals()
);
$server->listen();

You could also compose them in an Application instance, and utilize run():

$app = AppFactory::create();
$app->pipe('/blog', $blog);
$app->pipe('/api', $api);

$app->run();

This approach allows you to develop discrete applications and compose them together to create a website.

Mezzio mezzio

On this page

Caution

Reference

Usage Examples

Using the built-in web server

Setting up autoloading for the Application namespace

Routing

Hello World using a Container

Hello World using a Configuration-Driven Container

Hybrid Container and Programmatic Creation

Using the container to register middleware

Place routing middleware correctly

Pipeline keys are ignored

Segregating your application to a subpath

Donate

Find documentation…

On this page

Caution

Reference

Usage Examples

Using the built-in web server

Setting up autoloading for the Application namespace

Routing

Hello World using a Container

Hello World using a Configuration-Driven Container

Hybrid Container and Programmatic Creation

Using the container to register middleware

Place routing middleware correctly

Pipeline keys are ignored

Segregating your application to a subpath

Donate

Find documentation…

mezzio

Table of Contents